How to get sound out from computer

To get sound out directly from computer through Tascam mixer to HD speakers

• make sure TASCAM basic set up is loaded and HD speakers are powered on.
• load _MOTU PCI-424 Proper Configuration (TenneyExternal/*shared)
• select digi002ADAT 1-8 on Tascam Layer Status
• touch slider 9 and make sure that HD-1s selected as output (upper left-hand side of mixer -- look for sign HD-1s)
• touch slider 10 and make sure that HD-1s on TASCAM is selected as output (yellow light should come on when you touch 9 or 10)
• check panning fro 9/10 and make sure pots are hard L and hard R
•check that the HD-1s output level found at top right of TASCAM mixer is up between 11-noon.

•move the HD1s slider to get sound

-- other things to check
• Bus outs on TASCAM for sliders 9/10 should be set to 9 and 10. Look for yellow light on the channel assignment in the upper left-hand side of TASCAM.